Simple timing electronic hypnosis circuit and working principle

This article refers to the address: http://

Production and use

The circuit transistor adopts a silicon triode, B of BG1 and BG2 is less than 100, and B of BG3 and BG4 is less than 30. The capacitor requires a small leakage current, otherwise the timing will be shortened. The AN is a small button that can be self-made or replaced with a small switch. CZ1 doorbell button jack, CZ2 is the headphone jack.

Look for a 40*25 mm copper plate, print the board with a small knife as shown in Figure 12.8.2, and then solder the components directly to the copper side. The whole machine can be installed in the pocket radio

LED Table Clock

Led Table Clock,Desk Clock Flip,Desk Clock For Office,Flip Clock With Light

Guangzhou Huanyu Clocking Technologies Co., Ltd. ,